Coating systems
Every commercial floor starts with diamond-ground prep and a moisture test. From there we build the system for your traffic, chemicals and schedule, and put it in writing.
01
Our core system
A moisture-tolerant 100%-solids epoxy base, a full broadcast of vinyl flake, and a UV-stable polyaspartic topcoat. Textured, hides wear, and holds up to vehicles and fluids.
02
Clean and bright
A smooth, solid-color base with a clear protective topcoat. Ideal where you want a bright, uniform floor that takes lines and zone markings well.
03
For damp slabs
Coastal slabs often carry moisture. We test every slab first. When a slab tests high, a 100%-solids vapor barrier goes down before the coating system, rated for slabs up to 25 lb.
04
Extra scratch resistance
A satin urethane wear coat with a scratch-resistance additive, or a high-gloss siloxane wear coat over the vapor barrier system, for floors that see the most traffic.
05
Lanes, zones, walkways
Forklift lanes, pedestrian walkways, hatched no-go areas, lift and bay outlines, painted into the coating system in the colors you choose.
06
Where every floor starts
Diamond grinding opens the concrete so the coating bonds mechanically. Cracks, pits and spalls are filled and ground flush first. No acid etching, no shortcuts.
Materials
We install Citadel Floor Finishing Systems, a Rust-Oleum company. The exact products for your floor, and their limits, are listed on your quote.
Free walk-through and written quote. We measure, check the slab, and plan the work around your hours.
